Which blade is described as 10 teeth and used for solid brass stock, iron piping, and heavy tubing?

Study for the Machinery Repairman Test. Enhance skills with comprehensive questions, detailed hints, and insightful explanations. Dominate your exam!

Multiple Choice

Which blade is described as 10 teeth and used for solid brass stock, iron piping, and heavy tubing?

Choosing hacksaw blade teeth per inch depends on the material and the thickness of what you’re cutting. A blade with about 10 teeth per inch hits a sweet spot for solid brass stock, iron piping, and heavy tubing because it cuts efficiently in relatively soft to medium-hard metals and in thick sections without binding or taking forever. Why that 10-teeth blade fits well: the teeth are spaced enough to remove material quickly in thick stock, yet not so coarse that the cut becomes ragged or the blade rides up and chatter occurs. It’s sturdy enough to resist bending when you’re cutting through heavy tubing and piping, while still giving a reasonable finish. Compare with the other options: a 14-teeth-per-inch blade is finer and suited for sheet metal, where a clean, thin-cut finish is desired but it would be slow and prone to binding on heavy brass stock or piping. A very coarse blade (around four teeth per inch) would gouge or struggle on brass or iron tubing and wear quickly. A blade in the six-to-eight range is typically used for annealed steels and similar soft steels but isn’t the best match for solid brass or heavy piping where a mid-range blade provides better balance of speed and control.

Choosing hacksaw blade teeth per inch depends on the material and the thickness of what you’re cutting. A blade with about 10 teeth per inch hits a sweet spot for solid brass stock, iron piping, and heavy tubing because it cuts efficiently in relatively soft to medium-hard metals and in thick sections without binding or taking forever.

Why that 10-teeth blade fits well: the teeth are spaced enough to remove material quickly in thick stock, yet not so coarse that the cut becomes ragged or the blade rides up and chatter occurs. It’s sturdy enough to resist bending when you’re cutting through heavy tubing and piping, while still giving a reasonable finish.

Compare with the other options: a 14-teeth-per-inch blade is finer and suited for sheet metal, where a clean, thin-cut finish is desired but it would be slow and prone to binding on heavy brass stock or piping. A very coarse blade (around four teeth per inch) would gouge or struggle on brass or iron tubing and wear quickly. A blade in the six-to-eight range is typically used for annealed steels and similar soft steels but isn’t the best match for solid brass or heavy piping where a mid-range blade provides better balance of speed and control.

More practice questions